[. . . ] 6 kg • Due to the continuing program of research and development, the specifications herein are subject to change without prior notice. [. . . ] When drilling into walls, floors or wherever ‘‘live’’ electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE MACHINE!Hold the machine by the insulated grasping surfaces to prevent electric shock if you drill into a ‘‘live’’ wire. Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin. 4) CAUTION: • The switch lever (paddle switch) cannot be squeezed with the reversing switch knob positioned halfway between marking and marking. € You cannot obtain reversing switch action with the switch lever squeezed since the reversing switch knob is thereby locked. MAINTENANCE CAUTION: Always be sure that the machine is switched off and unplugged before carrying out any work on the machine. Drilling operation • Drilling in wood When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece. [. . . ] För medurs rotation (normalläge) vrids omkopplaren till markerinoch till för moturs rotation. [. . . ]